Texsource- Screen Printing Supplies, Inks & Equipment

Now In: Blockout & Blockout Pens

Browse Departments

Browse Categories

Black Opaque Pens with a Broad Tip For trimming mistakes. Whip out an opaque pen and keep out the light! The tip different tips allow for faster detailed touch-ups, making your work appear flawless.

Shopping Cart-> 0 item(s)

BLACK OPAQUE PEN Fine Point

Black Opaque Pens with a Fine Tip For trimming mistakes. Whip out an opaque pen and keep out the light! The tip different tips allow for faster detailed touch-ups, making your work appear flawless.

Shopping Cart-> 0 item(s)

BLUE SCREEN BLOCKOUT PEN

Blue Blockout pens are quick drying (10 - 15 min.) reclaimable blockout. Recommended for use during screen preparation. Works with all stencil systems. Resists water based, plastisol, UV and most solvent based inks. Blockout is nonhazardous and biodegradable.

Shopping Cart-> 0 item(s)

GREEN SCREEN BLOCKOUT PEN

Green Blockout Pens are ultra fast drying (30 sec. - 1-1/2 min.) water soluble green blockout. Recommended for on or off the press touch-up or direct stencil systems. Resists plastisol, UV and most solvent based inks.

Shopping Cart-> 0 item(s)

RED LITHOPAQUE PEN

Red Lithopaque Pens feature a special formulation of UV absorbers that thoroughly block all light waves to prevent exposure. Even-flowing nibs lay down a rapid drying, thin film that does not creep, spread, crack or chip.

Shopping Cart-> 0 item(s)

SCREEN BLOCKOUT 901 (RED)

A water-soluble blockout that can be used for touch-ups of pinholes and Emulsion Break Down. Can be used in unventilated rooms. Used only with solvent-based or plastisol inks.

Shopping Cart-> 0 item(s)

SCREEN BLOCKOUT 905 HIGH VISCOSITY

A water-soluble blockout that can be used for touch-ups of pinholes and emulsion breakdown. Can be used in unventilated rooms. Used only with solvent-based or plastisol inks.

Shopping Cart-> 0 item(s)

ULANO NO. 60 Screen Filler Blockout

A water-soluble screen filler with drying characteristics similar to Indirect Films.

Shopping Cart-> 0 item(s)

ULANO NO.10 SCREEN BLOCKOUT HEAVY

ULANO Heavy Blockout No. 10 is a heavy, non-flammable, water-soluble screen filler with drying characteristics similar to indirect films. The high viscosity of ULANO Heavy Blockout No. 10 affords easier handling, and generally assures effective coverage in a single coating. Especially useful with coarse mesh. Can be used for touchups when thinned with cold water. Can be used in unventilated rooms since it contains no organic solvents. Recommended for use on all mesh, with all stencil systems. Use only with solvent-based or plastisol inks.

Shopping Cart-> 0 item(s)