Texsource- Screen Printing Supplies, Inks & Equipment

Now In: Additives

Browse Departments

Browse Categories

Clear Ink Reducer

Clear Reducer is used to lower Ink Viscosity. Maximum 3% by weight.

Shopping Cart-> 0 item(s)

Curable Ink Reducer

Curable Reducer is our #1 selling Reducer. Curable Reducer is a viscosity reducer that will cure within a standard plastisol temperature range allowing the viscosity of plastisol inks to be lowered without fear of over reducing, resulting in ink curing problems.

Shopping Cart-> 0 item(s)

IC-International Coatings 820 LF Flattener Ink Additive

International Coatings 820 LF Flattener Additive Screen Print

Shopping Cart-> 0 item(s)

IC-International Coatings Curable Lo-Bleed Ink Reducer

IC-International Coatings 1099LF will lower the viscosity of opaque, standard opacity and low bleed inks without affecting the bleed resistance or fusing characteristics of the ink being mixed...

Shopping Cart-> 0 item(s)

ICC 1096LF De-Tack Ink Additive

International Coatings 1096 LF De-Tack Additive

Shopping Cart-> 0 item(s)

Thickener Ink Additive

Thickener Ink Additive is a "Powder" and must be mixed by High Speed Mixer. It will continue to thicken with time.

Shopping Cart-> 0 item(s)

IC-International Coatings 600 LF Puff Ink Base

IC-International Coatings 600 LF Puff Ink Base Screen Print

Shopping Cart-> 0 item(s)

Tex Puff Base

Tex Puff Base will cure with a raised sponge effect A thick stencil should be used. Can also be used as an underbase for special effects printing. Color can be added to the base to tint if desired.

Shopping Cart-> 0 item(s)

TEX PUFF Screen Printing INK ADDITIVE

Formulated to be mixed with General Purpose Inks (GEN), SO Inks to give a raised or elevated effect. Puff Additive may be added in amounts of percent by weight (15-20%).

Shopping Cart-> 0 item(s)

Texsource FR Flame Retardant Ink Additive

Texsource FR Flame Retardant Ink Additive- add 20% by weight to make ink Flame Retardent.

Shopping Cart-> 0 item(s)

Texsource Gen Flame Retardant FR Ink Base

Gen FR Base is a flame retardent opaque base. Primarily printed on childrens sleep ware. Pigement loading is up to 20% for desired color.

Shopping Cart-> 0 item(s)

HD Rubber Base Ink

HD Rubber Base can be used as a high density gloss/clear or as a high gloss overprint to any ink. Add PC's to create special gloss images. Excellent adhesive carrier for foil, special flakes, caviar beads and other surface particles.

Shopping Cart-> 0 item(s)

ICC Stretch Ink Additive

1199LF can be easily mixed in Multipurpose, 700 Series, or 1100 Series plastisols to produce increased elongation of those inks for Lycra, Spadex and other stretch fabric applications.

Shopping Cart-> 0 item(s)

ICC NYLON INK BONDING CATALYST AGENT

Nylobond is the essential ingredient for printing on nylon jackets and other products made of woven nylon. Nylobond will reduce ink viscosity.

Shopping Cart-> 0 item(s)

UNION NYLOBOND Nylon Bonding Agent

UNION NYLOBOND Nylon Bonding Agent is an additive which, when mixed with UNION INK Plastisol Colors, will provide adhesion to most water-proofed Nylon jackets and other garments. Extensive tests have shown that NYLOBOND is effective with all UNION INK Plastisols. However, the PLUS and PATH series inks give the best results with very good opacity. Tests have also shown that NYLOBOND works satisfactorily with most plastisols on the market.

Shopping Cart-> 0 item(s)