Parker Davis Signs
Our StepStake® signs are now being used extensively throughout the United States and Canada.
We feel that we have the best and most economical line of sign holders on the market. StepStakes® provide the maximum economy for an attractive, durable, and easy to use outdoor sign installation when used with a 4mm corrugated plastic sign board.
We have also developed a "Quad Pod" configuration that will accommodate large corrugated signs up to 48" high x any length. This is accomplished by using a double height sign blank, applying the graphics on one side with the two sign copies "top-to-top", slitting the top face of the plastic, and bending it in half to form a two sided sign. One (or more for very wide signs) 2 Wire, 10" x 30" StepStake® is inserted into the bottom of each sign face and inserted into the ground. The 2 dimensional spacing of the wires in the ground coupled with the continuous top hinge forms an A-frame which results in a very stable sign installation. This configuration may also be used for a portable indoor sign.
We recommend for corrugated signs that small tick marks be printed at the bottom to assist in centering the sign on the stake and aligning the uprights of the stake in the proper flutes. If the wires are not properly spaced, it could be difficult to mount the sign or it could crease the corrugated sign blank.
We hope these explanations will assist you in arriving at the best sign installation for your use or your customer's use. Most of our StepStakes® are packed in attractive cartons that are designed to act as carrying cases. With an average weight of 25# per case, our products are packed to be convenient for carrying and storage.
 #44 Pin Vise & Vinyl Weeding Tools |
 Piggy Back Step Stake #SS-4 |
 Step Stake 10" x 30" SS-1 |
 The Chizz- All Removal Tool |
 U-TOP Step Stake 5 1/2" W x 30" H #SS-6 with 1/4" Base |
