 |
| How to Choose the Ink |
| Ink Selection: Texsource carries the most popular inks on the market. There are many series of ink; muli-purpose, low-bleed, nylon, polyester, towels, the list goes on and on. Choosing the right ink is important in saving time and money. |
|
 |
|
|
|
 |
| How to Load the T-shirt |
| Loading the Shirts: Since the screens will meet the platen in the same position each time, you need to determine where to put the shirt. |
|
| |
|
|
|
 |
| How to Print the Design |
The Print Stroke:
Place a bead of ink across the edge of the design. Select a square edged medium hardness squeegee (70 durometer). Hold the squeegee firmly with two hands spreading your fingers evenly across the handle |
|
| |
|
|
|
 |
| How to Flash Cure a Shirt |
| The flash unit should be set on "high" and be approximately 3" away from garment. It will take anywhere from three to five seconds to flash each color. |
|
| |
|
|
|
 |
| How to Clean up after Printing |
Leave the screen in the screen clamps. Remove any excess ink from the screen using a goop scoop pr ink spreader and place in back into the ink container.
|
|
| |
|
|
|
